Higit pang mga detalye tungkol sa mga transaksyon
| Supply para sa kapasidad: | 150 System / Sets bawat Buwan |
|---|---|
| Pakete: | segun las caracteristicas de la maquina |
| Paghahatid: | 30 días despúes de recibir el depósito |
Mga Detalye ng Produkto
Programa impormasyon
| Kalagayan: | Bago | Uri: | Epekto pandurog |
|---|---|---|---|
| Kapasidad (t / h): | segun el pedido | Lugar ng Pinagmulan: | Tsina (kontinente) |
| Tatak: | Huazn | Model Number: | PL |
| Dimensión (L*W*H): | segun el pedido | Timbang: | segun el pedido |
| Certificación: | EC,ISO9001 | Garantía: | un año |
| Servicio After-sales proporcionado: | Dirige disponible para mantener la maquinaria en ultramar |
Panoorin
1.tecnología japonesa
2.fácil matenimiento
3.Mataas na kahusayan
4.bajo costo
5.buen servicio al cliente
huazn PL chancadora de impacto vertical Descripción： 1.Specific design of rotator and cavity, high capacity, high ratio of sand, good shape product.
2.Specific transmission structure makes the equipment run at high speed and stably.
3.Specific structure and material of wearable parts increases its using life and reduce the operating cost.
4.Automatic hydraulic start and lubrication, anti-vibration, temperature control, timing transmission equipments make equipment safe and easy operation.
5.Artful internal flow self-circulation reduces dust dispersion. Parametros tecnicos：
| Specificacion | Max. tamaño de la alimentacion (mm) | velocidad del rotamiento(r / min) | Kapangyarihan(KW) | Kapasidad(t / h) | Dimension(mm) |
| PL(ST)-550 | 30 | 2258-2600 | 30-45 | 24-60（-5mm，30～60%） | 2550×1650×2380 |
| PL(ST)-700 | 35 | 1775-2050 | 55-90 | 55-95（-5mm，30～60%） | 3312×1840×2800 |
| PL(STD)-850 | 50 | 1460-1720 | 110-200 | 100-220（-5mm，20～60%） | 3630×2200×2860 |
| PL(ST)-850 | 50 | 1460-1720 | 150-220 | 113-240（-5mm，20～60%） | 4700×2200×2850 |
| PL(ST)-1000 | 60 | 1240-1460 | 220-320 | 180-345（-5mm，20～60%） | 5060×2290×3700 |
| PL(ST)-1200 | 60 | 950-1220 | 320-500 | 315-580（-5mm，20～60%） | 5570×2660×3750 |
Notas:
1. The above throughput is decided on the base of adequately and continuously feeding the limestone with loose density 1.6t/m3 and compressive strength ≤150Mpa, and the material moisture not more than 20%.
2. For PL series, the product less than 5mm will account for 20%-40%; for PL ST series, the product less than 5mm will account for 40%-60%.
3. PL(STD)-850 is the single motor driving
